Homepage » Brands » VacCoat

VacCoat

The English Vac Coat Ltd. is a strong supplier with good support in the field of accessories for Electron Microscopy. Vac Coat specializes in specimen preparation equipment such as Carbon- and Sputter Coaters. j.j. bos  has been supplying these instruments since 2025 as a cost-effective and qualitatively equivalent alternative to the Quorum (formerly Emitech) products that we have had in the delivery program since the 1980s. For all these brands j.j. bos can supply the Service and consumable materials such as targets, stubs, carbon cord, FTM crystals, etc.

To assist you with choosing a coater for ELECTRON MICROSCOPY, click HERE

To assist you with choosing a COATER IN GENERAL by feature, click HERE
Vac Coat Ltd.

 

VacCoat

Vac Coat Ltd.

Vac Coat Ltd. is a leading designer and manufacturer of high-quality custom-made vacuum coating systems based on Physical Vapor Deposition (PVD) methods.

With more than 28 years of experience in vacuum and thin film deposition technologies, our research and development team, including academic scientists and qualified engineers, fully supports and advises customers in choosing the proper system for their needs, system installation and training, and after-sales services. We also make coating systems to meet customers’ special inquiries by developing innovative designs.

Vac Coat vacuum coating systems range from low/high-vacuum sputter coaters like DSR1 and DST1, generally used for sample preparation in electron microscopy imaging, to high-vacuum sputter coater/thermal evaporators systems like DST2-TG or DST3-T with many optional features including plasma cleaner, mainly used for thin film deposition for research purposes.

Designed and manufactured components by our engineering team meet high-quality standards since many high-ranked universities and research centers are among our valuable customers, who are satisfied with our vacuum coating systems.

 

 

The vac Coat Products

The Vac Coat Pulsed Laser Deposition and Thermal Evaporator System – PLD-T

The versatile Pulsed Laser Deposition and Thermal Evaporator System – PLD-T is a high vacuum thin film deposition system enables to deposit different materials by both Pulsed Laser Deposition and Thermal Evaporation technique (Not Simultaneously). It can deposit complex materials and crystalline structures onto substrates with very little setup involved.

The Pulsed Laser Deposition technique leads to efficient, non-thermal ablation and preserves the stoichiometry of the target materials. By applying this method, it could deposit materials such as nitrides, oxides, super lattices, polymers, and composites. PLD-T with triple thermal sources can also deposit thin films through thermal evaporation.

PLD-T physical vapor deposition system is a multi-technique precise thin film coating device that enables the user to perform state of the art research projects in various fields like optics, electronics, solar cell fabrication, etc.

Features

Hardware

  • High vacuum level with a built-in turbo pump
  • Two-stage rotary vane backing pump (Diaphragm or scroll pump)
  • High-current DC power supply suitable for thermal evaporation of different materials
  • Quartz crystal monitoring system for real time thickness measurement (1 nm precision)
  • Reactive gas injection control through precision Mass Flow meter (MFC)
  • Full-range vacuum gauge
  • Rotatory sample holder with adjustable rotation, height, and tilt (For 3-inch sample holders)
  • Target manipulator with adjustable rotation speed
  • 3 thermal sources and special feedthrough
  • Equipped with an electronic shutter (for thermal evaporation configuration)
  • Equipped with a motorized boat selection
  • Two-year warranty

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User-friendly software, updatable via network
  • Semi-full automatic timed or thickness coating process (Optional)
  • Deposition parameters are adjustable through the touch screen panel (Optional)
  • Records and plots coating parameters graphs

Optional Facilities

  • 500 °C programmable substrate heater with software control

For more information about the PLD-T on the website of Vac Coat, click HERE

The Vac Coat Sputter Coater and Thermal Evaporator – DST3-T

The DST3-T is a triple-target turbomolecular-pumped multi-vacuum-coating system that combines a thermal evaporator and a sputter coater into a single compact desktop system. The high-vacuum system is suitable for depositing a wide range of materials. The triple magnetron target desk sputter coater can easily switch between evaporation and sputtering conditions (Not simultaneously).

The DST3-T sputter coating system with RF power supply is equipped with an auto-adjustable matching box, minimizing the reflected power in the RF sputtering process. This model, DST3-T, contains optional features to increase coated film adhesion to the substrate and improve the film structure, such as a 500 ˚C heater to be installed to heat the substrate during the deposition process, or a 300 V DC bias voltage can be applied to the substrate.

Features

Hardware

  • High vacuum level with built-in turbo pump
  • Two-stage rotary vane backing pump (Diaphragm and scroll pump)
  • DC and RF (Optional) power supplies suitable for metals, semiconductors, and dielectrics
  • Three 2” water-cooled angled, magnetron cathodes suitable for producing alloy films (DST3-TA) and multilayer deposition
  • Large sample holder stage (8 inches) for DST3-TS
  • Cathode mask designed for large substrate uniform deposition (DST3-TS)
  • Two fixed and movable quartz crystal monitoring systems for real-time thickness measurement (1 nm precision)
  • Gas injection control through two precision Mass Flow meters (MFC) for fine control of vacuum pressure and Ar flow or reactive sputtering gas
  • Full range vacuum gauge
  • Cathode selection motor
  • Sample rotation, height, and tilt are adjustable (For 3-inch sample holders)
  • Three manual or electronic (Optional) shutters
  • One thermal source holder
  • Two-year warranty
  • CE conformity

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User-friendly software, updatable via network
  • Semi-full automatic timed or thickness coating process (Optional)
  • Repeatable and programmable sputtering process in the automatic mode
  • DC/RF/High-current deposition parameters are adjustable through the touch screen panel (Optional)
  • Records and plots coating parameters graphs
  • Automated cathode selection

Optional Facilities

  • RF power supply and matching box for deposition of conductive and non-conducting targets
  • Plasma cleaner
  • 300 V DC substrate bias voltage
  • 500 ° C programmable substrate heater with software control

For more information about the DST3-T on the website of Vac Coat, click HERE

The Vac Coat Triple Target Sputter Coater – DST3

The DST3 is a triple-target, turbo molecular-pumped, vacuum coating system. It is suitable for the deposition of a wide range of materials. The DST3, triple target sputter coater, is equipped with a large chamber (300 mm diameter) and three 2” diameter water-cooled cathodes, which make it suitable for long-time depositions.

Features

Hardware

  • High vacuum level with a built-in Turbomolecular Pump
  • Two-stage rotary vane backing pump (Diaphragm or scroll pump)
  • DC and RF (Optional) power supplies suitable for metals, semiconductors, and dielectrics
  • Three 2” water-cooled angled, magnetron cathodes suitable for producing alloy films (DST3-A) and multilayer deposition (You can read about Co-Deposition here)
  • Large sample holder stage (8 inches) for DST3-S
  • Cathode mask designed for large substrate uniform deposition (DST3-S)
  • Two fixed and movable quartz crystal monitoring systems for real time thickness measurement (1 nm precision)
  • Gas injection control through two precision Mass Flow meters (MFC) for fine control of vacuum pressure and Ar flow or reactive sputtering gas
  • Full range vacuum gauge
  • Cathode selection motor
  • Sample rotation, height, and tilt are adjustable (For 3-inch sample holders)
  • Three manual or electronic (Optional) shutters
  • Two-year warranty
  • CE conformity

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User-friendly software, updatable via network
  • Semi-Full automatic timed or thickness coating process (Optional)
  • Repeatable and programmable sputtering process in the automatic mode
  • Adjustable DC/RF deposition parameters through the touch screen panel (Optional)
  • Records and plots coating parameters graphs
  • Automated target selection

For more information about the DST3 on the website of Vac Coat, click HERE

The Vac Coat Sputter Coater and Carbon/Thermal Evaporator – DSCT-T

The sputter coater and carbon/thermal evaporator – DSCT-T is configured as a sputter coater, carbon coater, and thermal evaporator with three interchangeable heads in one instrument suitable for scanning electron microscope (SEM) sample preparation and deposition of a wide range of oxidizing/ non-oxidizing materials such as gold (Au), platinum/palladium (Pt/Pd) alloy, silver (Ag), chromium (Cr), tungsten (W), iridium (Ir), etc., together with thermal evaporation of different sources like metals or carbon fiber/rod to coat on samples with non-conductive or poorly conductive surface for electron microscopy imaging or other applications.

Moreover, the thermal head can be used to clean TEM and SEM apertures. This high-vacuum SEM coater equipped with a turbomolecular pump offers high-quality, uniform films with fine grain sizes, suitable for specimens that require high resolution and high-quality characterization, such as FE-SEM, EDS/WDS, TEM, and EBSD.

The DSCT-T, sputter coater and carbon/thermal evaporator with a 2” magnetron cathode, is supplied with a high voltage switching DC power supply for sputtering and a high current power supply for carbon evaporation and thermal evaporation, hence could be used for research areas concerning different thin film applications such as micro and nano electronic and sample preparation.

DSCT-T can be equipped with a water-cooled cathode, which makes it suitable for long-time sputtering deposition. Also, DSCT-T can be provided with a 160 W power supply to facilitate sputtering of targets like chromium, tungsten, and other oxidizing metal targets (Optional).

The full-automatic sputter and carbon coating processes allow easy, precise, and repeatable performance. The maximum size of the substrates in this model could be 4 inches.

Features

Hardware

  • High vacuum level with built-in turbomolecular pump 90 L/s (Leybold)
  • Two-stage rotary vane backing pump (Diaphragm and scroll pump)
  • 80 W sputtering switching DC power supply
  • Carbon fiber evaporation head
  • Thermal evaporation head
  • 0-25 A pulsed DC power supply for carbon fiber evaporation
  • 0-100 A DC power supply for carbon rod evaporation (Optional)
  • Full range vacuum gauge (Leybold)
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • One 2-inch magnetron cathode
  • Automatic venting valve
  • Sample rotation, height, and tilt adjustable
  • Planetary sample holder (Optional)
  • Electronic shutter
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE conformity

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User-friendly
  • software, updatable via network
  • Repeatable and programmable coating process in the automatic mode
  • Semi-full automatic sputtering deposition process in timed or thickness modes
  • Semi-full automatic carbon fiber/rod deposition process
  • Automatic carbon fiber coating in flash or pulsed modes
  • Automatic carbon rod coating in pulsed or ramped modes
  • Records and plots coating parameters graphs
  • Storing coating recipes for repeatable depositions

For more information about the DSCT-T on the website of Vac Coat, click HERE

The Vac Coat Large High Vacuum Dual Sputter and Carbon Coater – DSCT-300

The DSCT-300 is configured as a dual sputter coater and carbon coater capable of performing successive sputtering and carbon evaporation deposition with fine-grain sizes without breaking the vacuum in a large 300 mm dia. chamber, suitable for research purposes and scanning electron microscope (SEM) sample preparation.

This device can be used for the deposition of uniform coatings of semiconductors, dielectrics and metals (Noble and oxidizing) such as gold (Au), platinum/palladium (Pt/Pd) alloy, silver (Ag), chromium (Cr), tungsten (W), iridium (Ir), etc., together with carbon thread (Fiber)/rod to coat thin films on various surfaces, for different applications like micro and nano-electronic, metalizing and electron microscopy imaging.

The DSCT-300 high vacuum coater is equipped with a turbomolecular pump that offers high-quality, uniform films with fine grain sizes under high vacuum conditions, suitable for specimens that require high-resolution characterization, such as FE-SEM, EDS/WDS, TEM, and EBSD.

The DSCT-300 coating system is equipped with a 160W switching DC and a 24V high-current power supply. As optional facilities, the sputtering can be executed with a power of up to 600 W, as well as performing RF sputtering for sputter coating of insulating materials (Based on the order).

DSCT is equipped with a water-cooled cathode, which makes it suitable for long-time sputtering deposition. The full-automatic sputter and carbon coating processes allow easy, precise, and repeatable performance. The maximum size of the substrates in this model could be 8 inches.

Hardware

  • High vacuum level with built-in turbo pump 90 L/s (Leybold)
  • Two-stage rotary vane backing pump (Diaphragm and scroll pump)
  • 160 W sputtering switching DC power supply
  • 500 W switching DC power supply for carbon fiber deposition
  • Carbon fiber (Thread) evaporation head
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • One 2-inch magnetron cathode
  • Automatic venting valve
  • Sample rotation, height, and tilt adjustable
  • Planetary sample holder (Optional)
  • Electronic shutter
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE conformity

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User-friendly software, updatable via network
  • Repeatable, programmable coating process in the automatic mode
  • Semi-full automatic sputtering deposition process in Timed or Thickness modes
  • Semi-full automatic carbon fiber/rod deposition process
  • Automatic carbon fiber coating in flash or pulsed modes
  • Automatic carbon rod coating in pulsed or ramped modes
  • Records and plots coating parameters graphs
  • Storing coating recipes for repeatable depositions

Applications

  • Fine-grain structural deposition of carbon and metals (Noble and oxidizing) thin films for SEM, FE-SEM, EDX, and TEM sample preparation
  • Nano and microelectronic
  • Conductive layers
  • Thin Film Sensors
  • GLAD sputtering

TEM grid plasma treatment for improved hydrophilicity (Optional)

For more information about the DSCT-300 on the website of Vac Coat, click HERE

The Vac Coat Turbo pumped sputter and carbon coater – DSCT

The DSCT is configured as a high-vacuum sputter coater and carbon coater with interchangeable heads in one instrument suitable for scanning electron microscope (SEM) sample preparation. The system can sputter noble metals such as gold (Au), palladium (Pd), platinum (Pt), and gold/palladium (Au/Pd), as well as oxidizing metals like tungsten and chromium, together with thermal evaporation of different carbon sources (Fiber or rod) to coat on samples with non-conductive or poorly conductive surface for electron microscopy imaging or other applications.

This high-vacuum SEM coater offers high-quality, uniform films with fine grain sizes, which are suitable for specimens that require high resolution and high-quality characterization, such as FE-SEM, EDS/WDS, TEM, and EBSD. The DSCT with a 2” magnetron cathode, 80 W switching DC power supply, and high current power supply for carbon evaporation, could be used for research and different thin film applications.

DSCT can be equipped with a water-cooled cathode, which makes it suitable for long-time sputtering deposition. Also, DSCT can be provided with a 160 W power supply to facilitate sputtering of targets like chromium, tungsten, and other oxidizing metal targets (Optional).

The full-automatic sputter and carbon coating processes allow easy, precise, and repeatable performance. The maximum size of the substrates in this model could be 4 inches.

Features

Hardware

  • High vacuum level with built-in turbomolecular pump 90 L/s (Leybold)
  • Two-stage rotary vane backing pump (Diaphragm and scroll pump)
  • 80 W sputtering switching DC power supply
  • Carbon fiber evaporation head
  • 0-25 A pulsed DC power supply for carbon fiber evaporation
  • 0-100 A DC power supply for carbon rod evaporation (Optional)
  • Full range vacuum gauge (Leybold)
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • One 2-inch magnetron cathode
  • Automatic venting valve
  • Sample rotation, height, and tilt adjustable
  • Planetary sample holder (Optional)
  • Electronic shutter
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE conformity
  • Vac Coat products are covered worldwide by both public and product Liability Insurance in case any property damage or personal injury happens caused by the Vac Coat systems.

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User friendly software, updatable via network
  • Repeatable and programmable coating process in the automatic mode
  • Semi-full automatic sputtering deposition process in timed or thickness modes
  • Semi-full automatic carbon fiber/rod deposition process
  • Automatic carbon fiber coating in flash or pulsed modes
  • Automatic carbon rod coating in pulsed or ramped modes
  • Records and plots coating parameters graphs
  • Storing coating recipes for repeatable depositions

For more information about the DSCT on the website of Vac Coat, click HERE

The Vac Coat Large Desk Sputter and Carbon Coater – DSCR-300

The large chamber rotary pumped DSCR-300, desk sputter and carbon coater, with a 3 or 4-inch water-cooled magnetron cathode, is a compact coating system for both sputter and carbon coating. This system is suitable for non-oxidizing targets deposition on large specimens. The water-cooled magnetron allows prolonged sputtering time, making it suitable for deposition of thick and thin layers.

DCT-300 with a 300 mm diameter cylindrical chamber allows long-term deposition on samples with a diameter of up to 15 cm or several small specimens. The full-automatic programmable carbon coating process allows easy, precise, and repeatable performance.

With the desk sputter coater model DSCR-300, one can deposit on different substrates for thin film applications, such as micro and nano electronic and SEM sample preparation. It is also capable of sputtering noble non-oxidizing metals such as gold (Au), palladium (Pd), platinum (Pt), and gold/palladium (Au/Pd) on non-conductive or poorly conductive samples. Besides, the nano-structured specimen coated with a thin carbon film can be characterized through various techniques like FE-SEM, TEM, and EDX..

Features

Hardware

  • Two-stage, direct drive rotary vane pump 6 m3/h
  • 80 W DC switching power supply for sputtering
  • 0-25 A pulsed DC power supply for carbon fiber evaporation
  • 0-100 A DC power supply for carbon rod evaporation (Optional)
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • One 2, 3, or 4-inch magnetron cathode
  • Electronic venting valve
  • Sample rotation, height, and tilt adjustable
  • Planetary sample rotation (Optional)
  • Electronic shutter
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE conformity

 

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User-friendly software, updatable via network
  • Precise control over coating rate to achieve finer grain structures
  • Manual or automatic timed and thickness deposition
  • Semi-full automatic sputtering
  • Semi-full automatic carbon fiber/rod deposition process
  • Pulsed or flash carbon fiber coating modes
  • Pulsed or ramped carbon rod coating modes
  • Repeatable and programmable sputtering and carbon coating process in the automatic mode
  • Records and plots coating parameters graphs
  • Storing coating recipes for repeatable depositions

For more information about the DSCR-300 on the website of Vac Coat, click HERE

The Vac Coat Large Desk Turbo-Pumped Carbon Coater – DCT-300

DCT-300 is a turbo-pumped carbon coater with a large chamber that is ideal for sample preparation for FE-SEM, EDS/WDS, TEM, EBSD analysis, and thin film applications. This high-vacuum coater offers high-quality, uniform carbon films with fine grain sizes, which are suitable for specimens that require high-resolution and high-quality characterization.

DCT-300 with a 300 mm diameter cylindrical chamber allows long-term deposition on samples with a diameter of up to 15 cm or several small specimens. The full-automatic programmable carbon coating process allows easy, precise, and repeatable performance.

Carbon fibers (Thread) or rods can be installed on separate chamber heads, as ordered by the customer, to coat the samples through different flash, pulsed, or ramped modes (Last mode available for carbon rod) in a manual or automatic deposition process.

Features

  • Hardware
  • High vacuum level with built-in turbo pump 90 L/s (Leybold)
  • Two-stage rotary vane backing pump (Diaphragm or scroll pump)
  • 500 W switching DC power supply for carbon fiber deposition
  • 2 kW high-current DC power supply for carbon rod deposition (Optional)
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • Automatic venting valve
  • Sample rotation, height, and tilt adjustable (for the small sample holder stage)
  • Planetary sample holder (Optional)
  • Electronic shutter
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE conformity

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User-friendly software, updatable via network
  • Semi-full automatic coating process (Optional)
  • Repeatable and programmable coating process in the automatic mode
  • Pulsed or flash carbon fiber coating modes
  • Pulsed or ramped carbon rod coating modes (Optional)
  • Automatic carbon fiber/rod deposition according to the set thickness value
  • Records and plots coating parameters graphs

Storing coating recipes for repeatable depositions

For more information about the DCT-300 on the website of Vac Coat, click HERE

The Vac Coat Turbo-Pumped Carbon Coater – DCT

The DCT is a turbo-pumped carbon coater that is ideal for FE-SEM, EDS/WDS, TEM, EBSD, and thin film applications. This high-vacuum carbon coater offers high-quality, uniform carbon films with fine grain sizes, which are suitable for specimens that require high-resolution and high-quality characterization.

Features

Hardware

  • High vacuum level with built-in turbo pump 90 L/s (Leybold)
  • Two-stage rotary vane backing pump (Diaphragm or scroll pump)
  • 500 W switching DC power supply for carbon fiber deposition
  • 2 kW high-current DC power supply for carbon rod deposition (Optional)
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • Automatic venting valve
  • Sample rotation, height, and tilt are adjustable
  • Planetary sample holder (Optional)
  • Electronic shutter
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE conformity

For more information about the DCT on the website of Vac Coat, click HERE

The Vac Coat Desk Carbon Coater – DCR

Desk Carbon Coater – DCR is a swift user friendly compact carbon fiber coating system suitable for sample preparation for analysis by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Energy-Dispersive X-Ray diffraction (EDX).

Features

Hardware

  • Two-stage, direct drive rotary vane pump 6 m3/h
  • 500 W switching DC power supply for carbon fiber deposition
  • 2 kW high-current DC power supply for carbon rod deposition (Optional)
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • Automatic venting valve
  • Sample rotation, height, and tilt adjustable
  • Planetary sample holder (Optional)
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE conformity

For more information about the DCR on the website of Vac Coat, click HERE

The Vac Coat Desk Thermal Evaporator – DTT

The DTT is a desktop, turbomolecular-pumped thermal evaporator for vacuum deposition of thin films. Different evaporation sources (boat/basket/coil) can be installed on the triple-source evaporation system on the baseplate. Adjustable substrate holder position through the touch screen is ideal for the deposition of single/multilayers or alloys.

This vacuum evaporator, with its suitable dimensions, is capable of reaching the desired pressure in a short time, and the coating process can take place within a few minutes. This coating system is ideal for laboratory research applications. Furthermore, it can be installed inside a glove box for the deposition of air-sensitive materials.

Features

Hardware

  • High-current DC power supply (12V, 100A), short-circuit protected
  • High-vacuum built-in turbomolecular pump
  • Two-stage rotary vane backing pump(6m3/h), scroll or diaphragm pump as the backing pump (optional)
  • Full range vacuum gauge
  • Quartz crystal monitoring system for real-time thickness measurement(1 nm precision)
  • Electronic leak valve
  • Electronic shutter
  • Sample rotation, height, and tilt are adjustable
  • 2-inch, 500 ± 1 °C substrate heater (Optional)
  • Substrate cooling system (Optional)
  • Glove box installation interface (Optional)
  • Water flow and temperature sensors
  • Two-year warranty

Automation

  • Intuitive touch screen to control the vacuuming process and device manipulation
  • User-friendly software updatable via network
  • Manual or automatic Timed or Thickness deposition (Optional)
  • Evaporation source (boat/basket/coil) selection for multilayer thin film deposition

Records and plots coating parameters graphs

For more information about the DTT on the website of Vac Coat, click HERE

The Vac Coat High Vacuum Thermal Evaporator – DTE

DTE is a desktop thermal evaporator system to deposit thin layers of materials on the substrate for research purposes and investigation by electron microscopy. DTE is configured as a material evaporator suitable for sample evaporation experiments. This low-budget, small chamber, and high-vacuum system is ideal for short-time deposition of noble and oxidizing metals.

DTE is equipped with a high-current power supply and a low-voltage (Resistive) thermal evaporation platform suitable for a wide variety of thermal evaporation applications. The system allows controlled thermal evaporation of a wide range of materials onto the substrate. Different types of thermal evaporation sources (Boat, basket, and coil) can be installed on the single thermal source holder.

The system is equipped with a 1.2 kW high-current DC power supply. The system can deposit a thin layer of the evaporated material on different surfaces for different applications, such as SEM sample preparation.

Features

Hardware

  • DC high-current power supply (Max. 12 V, 100 A)
  • 170 mm diameter Borosilicate-SST vacuum chamber
  • High vacuum level with built-in turbo pump (Leybold 90 l/s)
  • Two-stage rotary (Optional diaphragm or scroll) backing pump
  • Quartz crystal monitoring system for real time thickness measurement (1 nm precision)
  • Electronic shutter
  • Two high-current electric feed-throughs for thermal source insertion
  • Movable thermal source holder with possible upward or downward deposition configurations
  • Automatic venting valve
  • Full range vacuum gauge
  • S-Clip sample holder on the chamber lead
  • 2-inch rotating sample holder on the base plate (Optional)
  • Sample rotation, height, and tilt adjustable (For optional 2-inch sample holder)
  • Two-year warranty
  • CE conformity

Automation

  • Intuitive touch screen to control the vacuuming process and device manipulation
  • User friendly software, updatable via network
  • Semi-automatic evaporation process control
  • Controlled thin film deposition based on the set thickness
  • Records and plots coating parameters graphs

For more information about the DST1-300 on the website of Vac Coat, click HERE

The Vac Coat Magnetron Desk Sputter Coater – DST1-300

The high-vacuum magnetron desk sputter coater model DST1-300 is a compact coating system capable of performing durable deposition of uniform coatings of semiconductors, dielectrics and metals (Oxidizing and non-oxidizing) with fine-grain sizes in a large 300 mm dia. chamber. The large chamber DST1-300 with a 2, 3, or 4-inch water-cooled magnetron cathode is ideally suitable for coating large specimens with diameters of up to 15 cm, or multiple smaller specimens over a similar diameter.

The unlimited sputtering time makes it suitable for deposition of thick layers. The single magnetron target coater is equipped with 600 W DC power supply, or a 300 W RF power supply (Optional) with an auto matching box. The high vacuum system DST1-300 can deposit a wide range of oxidizing and non-oxidizing metal (Such as gold (Au), platinum/palladium (Pt/Pd) alloy, silver (Ag), chromium (Cr), tungsten (W), iridium (Ir), etc.), metal oxides (Like TiO2, ZnO, etc.), and dielectrics on different surfaces for thin film applications such as micro and nano electronic, and SEM sample preparation.

Features 

Hardware

  • Built-in turbomolecular pump (Leybold)
  • Two stage rotary vane vacuum backing pump (Diaphragm and scroll pump)
  • Full range vacuum gauge (Leybold)
  • DC power supply 600 W
  • Quartz crystal thickness monitor with precision of 1 nm and resolution of 1 Å
  • Electronic gas valves
  • Sample rotation, height, and tilt adjustable
  • Thermal evaporation feed-throughs (Optional)
  • Electronic shutter
  • Easy-to-change specimen stages (Rotation stage as standard)
  • Two-year warranty
  • CE standard conformity
  • Vac Coat products are covered worldwide by both public and product Liability Insurance in case any property damage or personal injury happens caused by the Vac Coat systems.

Automation

  • Intuitive touch screen to control the coating process and rapid data input
  • User friendly software, updatable via network
  • Controls coating rate to achieve finer grain structures
  • Semi-Full automatic coating process (Optional)
  • Repeatable and programmable sputtering process in the automatic mode
  • Manual or automatic timed and thickness sputtering deposition
  • Able to record and plot coating parameters graphs
  • Storing coating recipes for repeatable depositions

For more information about the DST1-300 on the website of Vac Coat, click HERE

The Vac Coat DST-1-170: High-vacuum sputter coater

The high-vacuum microwave desk sputter coater model DST1-170 is a compact coating system capable of depositing metals (both oxidative and non-oxidative such as gold (Au), platinum/palladium (Pt/Pd), silver (Ag), chromium (Cr), tungsten (W), iridium (Ir), and more). It is designed for short deposition periods. The DST1-170 can apply uniform thin films with fine grain sizes in a rapid cycle time and is particularly well-suited for sample preparation for scanning electron microscopy (SEM) analysis.

The DST1-170 high-vacuum coater offers high-quality uniform films with fine grain sizes, making it suitable for samples that require high resolution and quality characterization, such as FE-SEM, EDS/WDS, TEM, and EBSD. The DST1-170 is equipped with a 2-inch magnetron cathode and an 80 W switching DC power supply, allowing it to be used for research and various thin film applications.

Additionally, the DST1 can be equipped with a water-cooled cathode, which makes it suitable for extended deposition periods.

The maximum substrate size for this model can be up to 4 inches.

Features:

  • Intuitive touchscreen for controlling the coating process and quickly entering data
  • User-friendly software, updatable via network
  • Precise control of the coating speed for finer grain structures
  • Semi-automatic sputtering
  • Semi-automatic deposition
  • Repeatable and programmable sputtering  coating process in automatic mode
  • Manual or automatic sputtering by time and thickness
  • Records and plots graphs of coating parameters
  • Storage of coating recipes for repeatable deposits

For more information about the DST-1-170 on the website of Vac Coat, click HERE

The Vac Coat DSCR: Combined Sputter & Carbon Coater in Compact Format

The DSCR from VacCoat Ltd is an innovative 2-in-1 coater that enables both sputter and carbon coatings in a single compact and user-friendly system. This multifunctional unit is ideal for laboratories that require flexibility and high performance in sample preparation for SEM and other electron microscopy applications.

With the DSCR, you can choose between sputtering metals such as gold (Au), platinum (Pt) or palladium (Pd), or evaporating carbon via a wire or rod. This makes the system suitable for a wide range of samples – from conductive to non-conductive materials – depending on the desired application or analysis (such as EDS).

The coater is equipped with an intuitive touchscreen display, a reliable vacuum pump system, and offers fully automatic programming for repeatable, accurate coatings. The DSCR delivers consistent, fine layers for optimal image quality and analytical results..

Features:

  • Intuitive touchscreen for controlling the coating process and quickly entering data
  • User-friendly software, updatable via network
  • Precise control of the coating speed for finer grain structures
  • Semi-automatic sputtering
  • Semi-automatic deposition of carbon fibre/rods
  • Repeatable and programmable sputtering and carbon coating process in automatic mode
  • Manual or automatic sputtering by time and thickness
  • Records and plots graphs of coating parameters
  • Storage of coating recipes for repeatable deposits

The Vac Coat DSR-1: Compact Sputter Coater for High-Quality Coatings

The DSR-1 from VacCoat Ltd is an advanced, compact desk sputter coater designed specifically for applying thin conductive layers to non-conductive samples. Ideal for applications in scanning electron microscopy (SEM), the DSR-1 combines ease of use with high performance, even in laboratories with limited space.

This fully automatic system is equipped with an intuitive touchscreen, allowing users to quickly and accurately set up sputter coatings. Thanks to its precision vacuum system and reliable DC sputter source, the DSR-1 delivers consistent and reproducible results. The device is suitable for various sputter materials, including gold (Au), palladium (Pd), gold/palladium (Au/Pd) and platinum (Pt).

Features:

  • Intuitive touchscreen to control the coating process and quickly enter data
  • User-friendly software, updatable via network
  • Controls the coating speed to obtain finer grain structures
  • Semi-automatic coating process
  • Repeatable and programmable sputtering process in automatic mode
  • Manual or automatic deposition by time and thickness
  • Capable of recording and plotting coating parameter graphs
  • Storage of coating recipes for repeatable deposits

 

News
The Vac Techniche Plasma Cleaner / Asher M2V03VT

The M2V03VT from VacTechniche is a compact desktop reaction chamber that allows you to clean materials and treat surfaces using plasma. The […]

Read more
To choose a Vac Coat coater by feature

The flowchart below is very useful for selecting the right coater by feature. Click on the model name of the coater to […]

Read more
The Vac Coat Pulsed Laser Deposition and Thermal Evaporator System – PLD-T

The versatile Pulsed Laser Deposition and Thermal Evaporator System – PLD-T is a high vacuum thin film deposition system enables to deposit […]

Read more
The Vac Coat Sputter Coater and Thermal Evaporator – DST3-T

The DST3-T is a triple-target turbomolecular-pumped multi-vacuum-coating system that combines a thermal evaporator and a sputter coater into a single compact desktop system. The high-vacuum […]

Read more
The Vac Coat Triple Target Sputter Coater – DST3

The DST3 is a triple-target, turbo molecular-pumped, vacuum coating system. It is suitable for the deposition of a wide range of materials. […]

Read more
To choose a Vac Coat coater for electron microscopy

The flowchart below is very useful for selecting the right coater for electron microscopy. Click on the model name of the coater […]

Read more
The Vac Coat Sputter Coater and Carbon/Thermal Evaporator – DSCT-T

The sputter coater and carbon/thermal evaporator – DSCT-T is configured as a sputter coater, carbon coater, and thermal evaporator with three interchangeable heads in one instrument […]

Read more
The Vac Coat Large High Vacuum Dual Sputter and Carbon Coater – DSCT-300

The DSCT-300 is configured as a dual sputter coater and carbon coater capable of performing successive sputtering and carbon evaporation deposition with fine-grain sizes without breaking […]

Read more
The Vac Coat Turbo pumped sputter and carbon coater – DSCT

The DSCT is configured as a high-vacuum sputter coater and carbon coater with interchangeable heads in one instrument suitable for scanning electron […]

Read more
The Vac Coat Large Desk Sputter and Carbon Coater – DSCR-300

The large chamber rotary pumped DSCR-300, desk sputter and carbon coater, with a 3 or 4-inch water-cooled magnetron cathode, is a compact coating system […]

Read more
The Vac Coat Large Desk Turbo-Pumped Carbon Coater – DCT-300

DCT-300 is a turbo-pumped carbon coater with a large chamber that is ideal for sample preparation for FE-SEM, EDS/WDS, TEM, EBSD analysis, and thin film applications. This […]

Read more
The Vac Coat Turbo-Pumped Carbon Coater – DCT

The DCT is a turbo-pumped carbon coater that is ideal for FE-SEM, EDS/WDS, TEM, EBSD, and thin film applications. This high-vacuum carbon […]

Read more
The Vac Coat Desk Carbon Coater – DCR

Desk Carbon Coater – DCR is a swift user friendly compact carbon fiber coating system suitable for sample preparation for analysis by scanning electron microscopy (SEM), transmission […]

Read more
The Vac Coat Desk Thermal Evaporator – DTT

The DTT is a desktop, turbomolecular-pumped thermal evaporator for vacuum deposition of thin films. Different evaporation sources (boat/basket/coil) can be installed on the triple-source evaporation system on […]

Read more
The Vac Coat High Vacuum Thermal Evaporator – DTE

DTE is a desktop thermal evaporator system to deposit thin layers of materials on the substrate for research purposes and investigation by electron microscopy. DTE […]

Read more
The Vac Coat Magnetron Desk Sputter Coater – DST1-300

The high-vacuum magnetron desk sputter coater model DST1-300 is a compact coating system capable of performing durable deposition of uniform coatings of semiconductors, dielectrics and […]

Read more
The Vac Coat DST-1-170: High-vacuum sputter coater

The high-vacuum microwave desk sputter coater model DST1-170 is a compact coating system capable of depositing metals (both oxidative and non-oxidative such […]

Read more
The Vac Coat DSCR: Combined Sputter & Carbon Coater in Compact Format

The DSCR from VacCoat Ltd is an innovative 2-in-1 coater that enables both sputter and carbon coatings in a single compact and […]

Read more
The Vac Coat DSR-1: Compact Sputter Coater for High-Quality Coatings

The DSR-1 from VacCoat Ltd is an advanced, compact desk sputter coater designed specifically for applying thin conductive layers to non-conductive samples. […]

Read more

More information:

ENG - Formulier

"*" geeft vereiste velden aan

Dit veld is bedoeld voor validatiedoeleinden en moet niet worden gewijzigd.